Angle Grinder - 20V Brushless Cordless 115mm 3.0Ah Li-ion Variable Speed - CGR-5555

• ⚡ 20V CORDLESS POWER - There is no cable to trip over, no extension board to drag along and no socket to hunt for, so the same tool works on a terrace, at a site with the power still not connected, on a farm, or beside a vehicle on the road. You pick it up, press the switch and start working.
• 🔃 8500 RPM - Fast enough to cut straight through metal instead of chewing at it. A slow grinder leaves a rough, burnt edge that you then have to file down by hand, which is where most of the time on a job actually goes. This one leaves a clean edge the first time. Speed on its own means little - it is speed held under load that decides whether the tool cuts or stalls. Let the tool reach full speed before it touches the work, and it will bite cleanly instead of skating across the surface.
• 🧲 4 INCH DISC - This is the size every hardware shop in India stocks, so replacement wheels cost a few rupees and you can buy them in any small town. You are never stuck waiting for a special size to be ordered, and the wheels in this box are the same standard size.
• ⚙️ BRUSHLESS MOTOR - An ordinary grinder has small carbon blocks inside that rub, wear down and eventually need replacing. This motor has none, so there is nothing inside to wear out. It runs cooler, it lasts longer, and because less power is wasted as heat you get more work out of every charge. There are no carbon blocks inside to rub away, so there is nothing to replace and nothing to wear out. It runs cooler and wastes less power as heat, which on a cordless tool means more work out of every charge.
• 🎚️ ADJUSTABLE SPEED - 3 SPEED SETTING, (HIGH: 8500 RPM, MEDIUM: 5500 RPM, LOW: 3500 RPM), TRIGGER LOCK - Use the lower speeds for tile, polishing, thin sheet and anything that burns or cracks easily, and full speed for rods, angle iron and thick metal. A single-speed grinder forces you to guess, and guessing is what cracks the tile.
• 🔌 3.0 AH X 2 BATTERY PACK - Amp-hours are simply how long the tool runs before it needs charging, so a 3.0Ah pack works around half as long again as the 2.0Ah packs most kits in this price range ship with. Where a kit includes two packs, the second one charges while the first is working and the job never stops. The pack slides off without tools, so a spare swaps in within seconds. It charges from any ordinary wall socket - no special supply needed. The same pack fits the other tools on this battery platform, so a spare you already own is not wasted.
• 🔋 BATTERY LEVEL INDICATOR - A small light tells you how much charge is left before you climb the ladder, not after. You can plan the cut around the charge you actually have, instead of stopping halfway through with the wheel still buried in the metal and the job only half done.
• 🪶 1.7 KG WITH BATTERY - Light enough to hold at arm's length or above your head without your wrist and shoulder giving out after ten minutes. Weight is the reason most people stop early, and it is the difference between finishing a gate in one go and coming back to it the next morning. Weight is the single thing most people underestimate when buying a power tool, and it is usually the reason a job gets left half finished. Balanced so the weight sits over your hand rather than out at the front, which is what makes a tool feel heavier than it is.
• 🛡️ BUILT FOR SAFETY - LARGE PADDLE TYPE TRIGGER WITH LOCK ON SWITCH - The guard, the handle and the switch are all there for one reason: a grinder spins very fast, and a slip should stay a slip rather than becoming an injury. Fit the guard, use the side handle, and keep both hands on the tool.
• 🛡️ 6-MONTH WARRANTY WITH SERVICE IN INDIA - covered against manufacturing defects, with genuine spare parts and our own service team, Monday to Saturday. If something goes wrong there is a number to call and a person who answers.

Six months against manufacturing defects, from the date of purchase.

Service is handled in India. Genuine spare parts are stocked, so a worn part does not end the tool.

Contact care@tomahawk.tools or call +91 99300 90896, Monday to Saturday.